제조사 | EKSPLA UAB |
---|---|
가격 | TBD |
문의 | 김길석박사, 하윤미과장 (02-3461-1103) |
PS514x series flashlamp drivers are designed for multi-lamp pumping of high energy pump chambers usually based on phosphate or silicate glass rods. This is highly-customizable power supply containing one-channel charging unit PS514xk and required quantity of one or two channel discharging units PS514xi. Each discharging channel is suited to drive one lamp. The PS514x has as many discharge channels as pump chamber has flashlamps. All discharging channels works synchronically. Usually, high energy systems work at very low repetition rate – not exceeding 1 Hz down to 1 shoot per hour.
Hence simmer option is not applicable and lamp igniting (triggering) appears with every discharge. We usually recommend external lamp igniting with separate igniting unit (one- or multi-channel). However internal serial igniting is possible in some cases as well.
Description of PS514x given here is only as one example of possibilities to built high energy powering system, and any time by ordering it can be flexibly changed. All set of charging and discharging units can be mounted to 19” standard racks (sold separately).
Charging unit | PS5144K |
---|---|
Number of independent outputs | 1 |
Max average output power Pavg | 0.8; 1.6; 2.4; 3.2 kJ/s (options) |
Internal capacitor at output | 1 µF |
Capacitor bank charging voltage Uch | 4000 V |
Load voltage regulation | 0.3 % |
Pulse to pulse stability | 0.3 % |
Voltage linearity | 0.3 % |
Protection features | overvolt, overheat, interlock |
Computer interface | LAN / CAN |
Triggering mode | external |
Mains for options 0.8, 1.6, 2.4 kW of Pavg | Single phase, 230 V (-10 %, + 6 %), 47-63 Hz |
Mains for options 3.2 kW of Pavg | Three phase, 210 V 3FD or 400 V AC 3 FY |
Power consumption, average | <1.8; <3.2; <4.5; <5.8 kW (as per options above) |
Power consumption, peak | 2; 4; 6; 8 kW (as per options above) |
Dimensions | 19" x 4U front panel, 547(D) x 440(W) mm case |
OPERATION CONDITIONS | |
Ambient temperature | from 0 to + 40 °C |
Humidity | up to 80 % non-condensing |
Discharging unit | PS5144i |
---|---|
Number of independent outputs | 2 (1 as option) |
Maximal capacitors bank voltage | 4000 V |
Maximal capacitors bank capacity at 3 kV | 700 µF |
Typical repetition rate | < 1 Hz |
Computer interface | LAN |
Triggering mode | controlled by charging unit |
Simmer | N/A |
Mains | N/A |
Dimensions | 19" x 6U or 8U front panel, 547(D) x 440(W) mm case |
OPERATION CONDITIONS | |
Ambient temperature | 0 to + 40 °C |
Humidity | up to 80 %, non-condensing |
Model | Charging rate | Maximal voltage | Control interface | Mains |
---|---|---|---|---|
PS5144k | 1.5 kJ/s | 3000 V | CAN, LAN | 230 V 50/60 Hz |
PS5144kH | 3 kJ/s | 4000 V | CAN, LAN | 230 V 50/60 Hz |
Model | Number of discharge channels | PFN specifications | Flashlamp recomended | ||||
---|---|---|---|---|---|---|---|
Capacitance, µF | Inductance, µH | Rated voltage, V | Maximal stored energy, J | Pulse duration FWHM, µs | |||
PS5144i | 2 | 700 | 40 | 3000 | 3150 | 350 | Ø15×200 mm |
PS5144iH | 2 | 500 | 85 | 4000 | 4000 | 430 | Ø15×300 mm |
Model | Number of channels | Maximal output voltage for each channel | Supply voltage |
---|---|---|---|
IGN-40-24-1 | 1 | <40 kV | +24 V |
IGN-40-24-9 | 9 | <40 kV | +24 V |
IGN-40-24-14 | 14 | <40 kV | +24 V |