제조사 | EKSPLA UAB |
---|---|
가격 | TBD |
문의 | 김길석박사, 하윤미과장 (02-3461-1103) |
NT252 series tunable laser systems integrates into a single compact housing a nanosecond Optical Parametric Oscillator (OPO) and Diode-Pumped Solid–State (DPSS) Q-switched pump laser.
Diode pumping enables fast data acquisition at high pulse repetition rates up to 1 kHz while avoiding frequent flashlamp changes that are common when flashlamp pumped lasers are used. Built-in chiller eliminates the need for tap water for cooling, thus further reducing running and maintenance costs.
All lasers feature motorized tuning across the specified tuning range. The output wavelength can be set from control pad with backlit display that is easy to read even while wearing laser safety glasses. Alternatively, the laser can be controlled also from personal computer through USB (RS-232 is optional) interface using supplied LabVIEW™ drivers.
High conversion efficiency, stable output, easy maintenance and compact size make our systems excellent choice for many applications.
Option | Feature |
---|---|
-SH | Tuning range extension in UV range (335 – 670 nm) by second harmonic generation |
-H, -2H | 1064 and 532 nm output via separate port |
-FC | Fiber coupler |
-Attn | Attenuator option |
Model | NT252 |
---|---|
OPO 1) | |
Wavelength range | |
Signal | 670 – 1063 nm |
Idler | 1064 – 2600 nm |
SH | 335 – 670 nm |
Pulse energy 2) | |
OPO | 900 µJ at 800 nm |
SH | 180 µJ at 400 nm |
Pulse repetition rate | 1000 Hz |
Linewidth 3) | <8 cm-1 |
Tuning resolution 4) | |
Signal | 1 cm⁻¹ |
Idler | 1 cm⁻¹ |
SH | 2 cm⁻¹ |
Polarization | |
Signal | horizontal |
Idler | vertical |
SH | horizontal |
Typical beam diameter 5) 6) | 3 × 6 mm |
PUMP LASER | |
Pump wavelength 7) | 532 nm |
Max pump pulse energy 8) | 4 mJ |
Pulse duration 9) | 4 – 6 ns |
Pulse energy stability (StdDev) | < 2.5 % |
PHYSICAL CHARACTERISTICS | |
Unit size (W × L × H) | 456 × 1030 × 274 mm |
Power supply size (W × L × H) | 520 × 400 × 300 mm |
Umbilical length | 2.5 m |
OPERATING REQUIREMENTS | |
Cooling | built-in chiller |
Room temperature | 18 – 27 °C |
Relative humidity | 20 – 80 % (non-condensing) |
Power requirements | 90 – 240 V AC, single phase 50/60 Hz |
Note: Laser must be connected to the mains electricity all the time. If there will be no mains electricity for longer that 1 hour then laser (system) needs warm up for a few hours before switching on.