가변파장 레이저
PhotoSonus
Mobile High Energy Tunable Wavelength Laser System for Photoacoustic Imaging
High output energy for larger area illumination
Pump laser, OPO and PSU in a single mobile unit
High 180 mJ output energy
Fast wavelength tuning available
제조사 레이비스
가격 TBD
문의 02-3461-1103
제품 특징

PhotoSonus

Mobile High Energy Tunable Wavelength Laser System for Photoacoustic Imaging
  • High output energy for larger area illumination
  • Pump laser, OPO and PSU in a single mobile unit
  • High 180 mJ output energy
  • Fast wavelength tuning available

Features & Options

FEATURES

  • High 180 mJ output energy
  • Wide tuning range from 660 to 1064 nm and from 1065 to 2300 nm
  • 10 Hz or 20 Hz pulse repetition rate
  • Integrated pump laser, OPO and PSU in single portable unit
  • One year warranty
  • Low maintenance cost
  • Fiber bundle connectors with safety interlock

OPTIONS

  • Fast wavelength tuning
  • High energy (250 mJ) – inquire separately
  • Motorized switching between OPO and pump wavelengths
  • Access to pump laser wavelengths (1064 / 532 nm)
  • Idler output 1065 – 2300 nm
  • Motorized attenuator
  • Energy meter
  • Fiber bundle

Description

Following the demand of high output energies in the photoacoustic market for imaging larger volumes of tissue, PhotoSonus, an updated high energy tunable laser source for photo-acoustic imaging is introduced. Time-tested Ekspla nanosecond pump laser, parametric oscillator, power supply and cooling unit are integrated in a single robust housing to provide mobility, ease of use and low maintenance cost.

Highly flexible PhotoSonus platform makes it easy to be integrated and used in a photoacoustic imaging system: it is fully motorized and computer controlled, have user trigger outputs / inputs and special options such as motorized switching between OPO and pump wavelengths.

Parametric oscillator generates output energies up to 180 mJ at peak of wide wavelength tuning range (660 – 2300 nm). Customizable and interlocked fiber bundle connector ensures safety and ability to fit various size fiber bundles.

For customers who demand even higher output energy, we are introducing PhotoSonus with High Energy option. 250 mJ output energy is achieved at the peak from OPO at 10 Hz. For more details inquire separately.

Specifications

MODEL 1)PhotoSonus
OPO
Wavelength range
    Signal660 – 1064 nm
    Idler (optional)1065 – 2300 nm
Pulse repetition range10 or 20 Hz
OPO output pulse energy 2)>180 mJ at 10 Hz or 
>160 mJ at 20 Hz
Scanning step:
    Signal (660  – 1064 nm)0.1 nm
    Idler (1065 –  2300 nm)1 nm
Pulse duration 3)3 – 5 ns
Signal linewidth<10 cm-1
Typical signal beam diameter (1/e²) 4)7 ± 2 mm
Control interfacesUSB, LAN, RS232
PHYSICAL CHARACTERISTICS
CoolingClosed loop air-water cooled
Unit size (W × L × H)434 × 672 × 887 mm
OPERATING REQUIREMENTS
Room temperature18 – 27 °C
Relative humidity20 – 80 % (non-condensing)
Power requirements 5)208 or 240 VAC, single phase 50/60 Hz
Power consumption<1.8 kW at 10 Hz, 
<3.4 kW at 20 Hz
  1. Due to continuous improvement, all specifications are subject to change without notice. The parameters marked typical are not specifications. They are indications of typical performance and will vary with each unit we manufacture. Unless stated otherwise all specifications are measured at 700 nm.
  2. Free space measurement at 700 nm. See tuning curves for typical outputs at other wavelengths.
  3. FWHM measured with photodiode featuring 500 ps rise time and 600 MHz bandwidth oscilloscope.
  4. Measured at the output at 700 nm wavelength. Can be adjusted as per request.
  5. Mains voltage should be specified when ordering.

Performance & Drawings