펨토초 fiber
LightWire FPS series
Compact Fiber Seeders for Picosecond Lasers
Up to 200 mW
Up to 50 nJ
2 – 9 ps narrow bandwidth pulses
kHz up to MHz pulse repetition rates
Turn-key operation
제조사 레이비스
가격 TBD
문의 02-3461-1103
제품 특징

LightWire FPS series

Compact Fiber Seeders for Picosecond Lasers
  • Up to 200 mW
  • Up to 50 nJ
  • 2 – 9 ps narrow bandwidth pulses
  • kHz up to MHz pulse repetition rates
  • Turn-key operation

Features & Applications

FEATURES

  • Pulse energy >50 nJ at repetition rate <1 MHz
  • Sub-10 ps pulse duration
  • Close to Fourier-transform limited spectral bandwidth
  • Integrated fiber pulse picker for flexible repetition rate control (20 kHz – 40 MHz, burst mode available)

APPLICATIONS

  • Seeding solid state amplifiers

Description

LightWire FPS series fiber lasers are dedicated for seeding solid state Nd:YAG amplifiers. Compact, cost efficient FPS series models deliver sub‑10 ps pulses at 1064 nm wavelength with the average output power up to 200 mW and pulse energy up to 50 nJ.

They feature narrow close to bandwidth limited spectrum and low pulse amplitude noise. Wavelength tunability ensures that seed pulses are always spectrally overlapped with the amplification spectrum of your amplifier.

Specifications

ModelFPS10FPS100FPS200
MAIN SPECIFICATIONS 1)
Central wavelength1064 nm; tunable ±0.2 nm
Pulse duration2.3 ± 0.3 ps7 ± 1 ps9 ± 1 ps
Spectral bandwidth0.7 ± 0.2 nm0.4 ± 0.1 nm0.25 ± 0.05 nm
Oscillator pulse repetition rate40 ± 2 MHz
Pulse repetition rate with pulse picker2)20 kHz – 40 MHz (PRR = PRROSC/N, N=1,4,5,...,2000)
Output power (without/with pulse picker)> 2 mW / > 1 mW> 80 mW / > 40 mW> 200 mW at 10 MHz
> 40 mW at 1 MHz
> 5 mW at 100 kHz
Pulse energy (without/with pulse picker)> 50 pJ / > 25 pJ> 2 nJ / > 1 nJ> 50 nJ at repetition rates < 200 kHz
Polarizationlinear, > 100:1 extinction
Optical outputFC/APC connector or collimator with mounting flange (optional)collimator and isolator node 3)
Umbilical3 m length armored cable Ø5mm
Collimated beam diameter0.9 ± 0.1 mm or 
1.3 ± 0.1 mm or 
2.1 ± 0.2 mm
0.9 ± 0.1 mm
Beam heightNA38 mm
Beam qualityM2 < 1.1
Pulse train monitoringphotodiode output for oscillator train, TTL synch pulse for laser output (when pulse picker included)
Dimensions of control unit (L×W×H)315 × 450 × 95 (stand alone) or
315 × 482 × 95 (19" rack mountable)
Dimensions of collimator (D×L)Ø33 × 11.76 mm
Dimensions of collimator & isolator node (L × W × H)138 × 66.6 × 52 mm
Weight< 10 kg
Control interfaceUSB, CAN, RS232, LAN (WLAN option)
Power supply (AC/DC adapter included)100 – 240 V, 50 – 60 Hz AC
Power consumptionmaximal 230 W (typical 60 W)
Operating conditions10 – 30 °C, humidity – not condensing
  1. Due to continuous improvement all specifications are subject to change without notice.
  2. Pulse picker is an option for FPS10, FPS100 models. It supports external gating. FPS200 includes internal frequency divider, which enables pulse repetition rate reduction but does not support external gating.
  3. FPS200 model is provided with collimator & isolator node with dimensions 138×66.6×52 mm.

Performance

Drawings

Ordering information